User Manual

8
Operating the Touchscreen Display
Admit a Patient
1. Touch
A/D/T
.
2. Touch display tile for device to be used.
3. Touch
ADMIT
.
4. Type patient’s name.
5. To enter a patient’s ID, touch
PATIENT ID
box; then type patient’s ID.
6. To enter a patient’s room/bed or temporary location, touch
LOCATION
box.
7. Touch
CHANGE ADMIT TIME
to adjust admit time if needed (you cannot adjust admit time prior to
discharge time for last patient on this monitor).
8. IF ADMIT TIME NEEDS TO BE ADJUSTED, touch
SET CUSTOM ADMIT TIME
.
9. Move
≤
pointer on slide bar to select correct admit time.
Discharge a Patient
1. Touch
A/D/T
.
2. Touch display tile for patient to be discharged.
3. Touch
DISCHARGE
.
4. Touch
YES
. Allow data to clear from NAME/ID/LOCATION boxes.
Generate Recording
1. Touch
RECORD
.
2. Touch display tile for patient desired for this recording.