User Manual

21
Problem May Be Caused By... Try This...
Vision Base System errors. If internal system errors
occur, some error text or
coded information will be
displayed. Write down any
such messages and contact
MDE technical support for
assistance.
No Communication Message
Problem May Be Caused By... Try This...
“NO COMM” (No
communication) message.
Link Auxiliary Base (LAB)
is off.
Turn LAB on.
Connections may be loose. Power off system; check all
system connections, paying
particular attention to
antenna. Restart system.
ESCORT monitor is out of
range or not powered up.
Confirm Escort moni tor is
in range and retry. Confirm
link by accessing bedside
Network Status page.
ESCORT bedside is not
assigned to central station
frequency.
Confirm bedside monitor is
configured to Central
Station frequency channel
in Configuration function.
Central Station not
recognizing bedside
monitor.
Confirm central station is
configured for monitor(s)
in question. Check Power
Levels page at Central
Station to confirm
communication or view
bedsides.