User Manual

Page 7
Scenario #5
No Patient Admitted in Tile but has Good Signal and Good Battery Indication
If the tile selected does not contain an admitted patient, but has a good signal, and has a good battery
indication, a popup displays and says:
ACTIVE TRANSMITTER ON CHANNEL <Channel> – DISABLE OLD TRANSMITTER –
CAN NOT ASSIGN
a. Touch
OK
, remove the new transmitter from the Vision base and disable the old transmitter.
b. Start again from
Step 3
on page 2.
Scenario #6
No Patient Admitted in Tile but has Good Signal and Low Battery Indication
If the tile selected does not contain an admitted patient, but has a good signal, and has a Low Battery
indication, the on-screen keyboard displays and says:
TRANSMITTER ADMIT: ENTER PATIENT INFORMATION
a.
Using the on-screen keyboard, enter the
PATIENT NAME, PATIENT ID
, and
LOCATION
.
b.
Touch
EXIT
to begin the programming operation.
ADMITTING PATIENT…
is displayed at the
top of the on-screen keyboard.