User Manual

Page 6
Scenario #4
Patient Admitted in Tile, has Good Signal and Good Battery Indication
If the tile selected contains an admitted patient, has a good signal, and has a good battery indication, a
popup displays and says:
WARNING! – ACTIVE TRANSMITTER ON PATIENT <Name> CHANNEL <Channel> –
CONTINUE?
a. Touch
YES
if you wish to replace transmitter (or touch
NO
to cancel).
b. After programming completes successfully, the following message is displayed:
TRANSMITTER READY – WRITE <Name> AND <New Channel> ON TRANSMITTER
Touch
OK
, the following message is displayed:
DEACTIVATE OLD TRANSMITTER PRIOR TO ACTIVATING NEW TRANSMITTER
c. Touch
OK
, remove the new transmitter from the Vision base, write patient name and channel
number on transmitter, and
deactivate the old transmitter prior
to going to
Step 5
on page 8.