User Manual

Page 5
Scenario #3
Patient Admitted in Tile, has Good Signal and Low Battery Indication
If the tile selected contains an admitted patient, has a good signal, and has a Low Battery indication, a
popup displays and says:
PATIENT CURRENTLY ADMITTED – REPLACE TRANSMITTER ON PATIENT <Name>
CHANNEL <Current Channel>?
a. Touch
YES
to replace transmitter.
b. After programming completes successfully, the following message is displayed:
TRANSMITTER READY – WRITE <Name> AND <New Channel> ON TRANSMITTER
Touch
OK
, the following message is displayed:
DEACTIVATE OLD TRANSMITTER PRIOR TO ACTIVATING NEW TRANSMITTER
c. Touch
OK
, remove the new transmitter from the Vision base, write patient name and channel
number on transmitter, and
deactivate the old transmitter prior
to going to
Step 5
on page 8.