Manualshelf

User Manual

ManualsBrandsMedical Data Electronics ManualsElectronicsStickman Transmitter, DS
12345678910
Page 3
a.
Using the on-screen keyboard, enter the
PATIENT NAME, PATIENT ID
, and
LOCATION
.
b.
Touch
EXIT
to begin the programming operation.
ADMITTING PATIENT…
is displayed at the
top of the on-screen keyboard.
c.
After programming completes successfully, the following message is displayed:
TRANSMITTER READY – WRITE <Name> AND <Channel> ON TRANSMITTER
Touch
OK
, remove the transmitter from the Vision base, write patient name and channel number on
transmitter and go to
Step 5
on page 8.