User's Manual

Notebook PC Tour 
2-2. Operation Status Lamps
1. Power Lamp
Blinking: The system is in Standby mode.
On: The system is running on the AC power or battery.
Off: The system is turned off or in Hibernate mode.
2. AC Power and Battery Status Lamp
Off: The AC adapter is not connected.
On: The AC adapter is connected.
Blinking: The battery is charged less than 10 %.
If you try to turn on the system that has entered the Hibernates mode or been turned off after a low-battery alarm,
the system will not be turned on but the lamp will blink three times.
3. Hard Disk Drive Lamp
The lamp is turned on when the HDD is running.
Do not turn off the power forcibly while the hard disk drive lamp is on. Otherwise, the data may get impaired.
4. Wireless LAN lamp
Off: Wireless LAN is not in use.
Blinking (short interval): Wireless LAN/Bluetooth is connected and data are being transmitted.
Blinking (every 2 - 3 seconds): Wireless LAN/Bluetooth is not connected but Wireless Radio is on.
Blinking (every 3 - 4 seconds): An access Point is being searched for to connect Wireless LAN/Bluetooth.
On: An access point is being searched for or Wireless LAN is connected.
The Wireless LAN/Bluetooth lamp may operate differently depending on model type.
 The Wireless LAN card and the Bluetooth device are optional, and so it may not be supported in some mod-
els.