HW100STB )54<+8:+8 (5> :U OTY[XK ZNGZ ZNK VXUJ[IZ UVKXGZOTM GZ OZY HKYZ VRKGYK XKGJ ZNOY [YKX’Y SGT[GR HKLUXK [YK GTJ QKKV OZ LUX L[Z[XK XKLKXKTIK
1 2 2 2 3 4 5 6 Notice 7-9 10-12 10 10 10 Sleep Setting 11 11 11 12 13 14
This marking consists of two graphical symbols and a warning message. The detailed specifications are as follows: To reduce the risk of electric shock, do not remove the cover. Equipment service and maintenance should only be undertaken by trained personnel. When not in use for an extended period of time, unplug the power cord from the outlet. Additionally, do not use a damaged power cord. Do not touch the power cord with wet hands.
2
Press to mute the sound of TV audio.
Make sure the STB is connected properly as below: Connect the RF OUT to another TV if necessary.
Refer to your television user's manual if necessary.
6
Special Notice Parental Control Default password is: 0000.
Special Notice RRT Settings OK Confirm the password.
Special Notice 9
Press PROG key when the TV is showing no menu to bring up the channels list (Figure 8). Information about channel numbers, name and skip status of all channels are shown here. 8 Press EPG key to open the EPG window. It wil display the first page of the program scheduler.
(The numbers indicate the sleep timer in hours.
1 NOTE: When under the setting of LOOP THROUGH, the machine will not play the TV program. Antenna television broadcasting signals will be directly output through the RF OUT terminals. If output signal isn’t very good in standby, please turn off the power switch of set-top-boxes.
13
14
