Instruction manual

87
Settings
2
"Configure Wi-Fi hotspot"
▶
Set
"Network SSID", "Security", and
"Password"
▶
"Save"

Setting a communication channel
󱚤
"Advanced settings"
󱚤
"Channel
Selection"
󱚤
tap a communication channel
󱚤
"Save"
3
Mark the "Wi-Fi hotspot"
checkbox
▶
Check the usage
precautions
▶
"OK"
4
Configure the Wi-Fi-compatible
device (sub-device) with the
same network SSID and security
as your FOMA terminal
• The Wi-Fi-compatible device (sub-device)
and your FOMA terminal (main device)
connect.
NOTE
󱛠
When using the FOMA terminal as a Wi-Fi access
point and two or more wireless LAN access
points are nearby using the same channel, the
FOMA terminal may not be found correctly by
the Wi-Fi-compatible device (sub-device). If not
able to be found, change the communication
channel.
󱛠
You can connect up to five Wi-Fi-compatible
devices at the same time.
󱛠
"Security" is set to "Open" at time of purchase.
Configure as required.
Connecting to a VPN (Virtual
Private Network)
A VPN (Virtual Private Network) is
technology allowing connection externally
to information on a protected local network
such as in a corporation or university. When
configuring VPN connection from your
FOMA terminal, obtain security information
from the network administrator.
󱛠
A VPN (PPTP) is unavailable if the access point
is set to sp-mode.
Adding a VPN
1
From the Home screen,
m
▶
"Setting"
▶
"Wireless &
networks"
▶
"VPN settings"
2
"Add VPN"
▶
tap the VPN type
you want to add
3
Follow the administrator's
instructions to configure each
item of the VPN setting
4
m
▶
"Save"
Connecting to a VPN
1
From the Home screen,
m
▶
"Setting"
▶
"Wireless &
networks"
▶
"VPN settings"