Instruction manual

86
Settings
Connecting to a Bluetooth device
To connect the FOMA terminal with another
Bluetooth device and exchange data, first
carry out pairing (connection setting) with
the other Bluetooth device and then connect.
󱛠
Some Bluetooth devices only pair, and some
Bluetooth devices proceed all the way to
connection.
󱛠
Turn on the partner's Bluetooth function and
check that it is connectable beforehand.
1
From the Home screen,
m
▶
"Setting"
▶
"Wireless &
networks"
▶
"Bluetooth
settings"
2
Mark the "Bluetooth" checkbox
▶
"Scan for devices"
• A scan for devices starts and a list of
available Bluetooth devices is displayed.
• To let your FOMA terminal be
recognizable by the partner Bluetooth
device, tap "Discoverable".
3
Tap the Bluetooth device you
want to communicate with
• Connection may be established with this
procedure, depending on the Bluetooth
device.
4
"Pair" or enter the passcode (PIN)
▶
"OK"

Canceling the Bluetooth device
connection
󱚤
Tap the Bluetooth device to disconnect
󱚤
"OK"
• To cancel pairing, touch and hold the
Bluetooth device you want to disconnect,
and tap "Disconnect" or "Disconnect &
unpair".
NOTE
󱛠
When not using the Bluetooth function, turn off
the Bluetooth function to prevent battery
consumption.
󱛠
If the Bluetooth device is not SCMS-T-compliant,
sound cannot be heard regardless of the audio
data type.
Using the FOMA terminal as a Wi-Fi
access point
You can use a tethering function via Wi-Fi
connection. By using the FOMA terminal as
a Wi-Fi access point (main device), you can
connect to the Internet with a
Wi-Fi-compatible device (sub-device), or
enjoy services such as online gaming.
󱛠
This function is available only in Japan.
1
From the Home screen,
m
▶
"Setting"
▶
"Wireless &
networks"
▶
"Wi-Fi hotspot"
▶
"Wi-Fi hotspot settings"