Instruction manual
85
Settings
Also note that the above connection
distances are not guaranteed.
•Connect the FOMA terminal distanced
from other devices (electric products/AV
equipment/OA equipment, etc.) as much
as possible (since the terminal is easily
affected by a microwave oven in use,
distance the terminal as far as possible).
If the terminal is brought closer when
another device is on, it may be unable to
connect normally or may be a cause of
television and radio noise or interference
(television picture may be unclear for
particular UHF or satellite channels).
•If you cannot connect normally due to a
nearby broadcasting station, wireless
transmitter, etc. change the location of
the partner Bluetooth device. You may
not be able to connect normally if
surrounding radio waves are too strong.
•You can establish a wireless connection
while a Bluetooth device is in a bag or
pocket. However, if you body is located
between the Bluetooth device and the
FOMA terminal, decreased
communication speed or noise may
occur.
Bluetooth devices and wireless LAN (IEEE
802.11 b/g/n) use the same frequency
band (2.4 GHz). If you use the FOMA
terminal or Bluetooth device near a
device equipped with a wireless LAN,
radio wave interference may occur and
can result in decreased communication
speed, noise, a poor connection, etc. If
this happens, do the following.
•Keep the FOMA terminal and a Bluetooth
device in wireless connection at least
10 m from a wireless LAN.
•Turn off a wireless LAN when used within
10 m.
The radio waves emitted by a Bluetooth
device may affect operation of medical
electronics or other equipment. Since it
may be the cause of an accident
depending on circumstances, turn off the
FOMA terminal and any nearby Bluetooth
devices in the following places.
•Trains
•Airplanes
•Hospitals
•Locations near automatic doors and
emergency alert devices
•Places with ignitable gas, such as gas
stations










