Instruction manual

35
Getting Started
❶
Earpiece (receiver)/Speaker
❷
Proximity/Illuminance sensor
• Hides tappable icons on the touch panel
when your face comes close to the touch
panel. This prevents you from unintentionally
activating functions when you are engaged
in a call.
• Detects the brightness around the terminal
and automatically adjusts the illuminance of
the display.

P. 88
❸
Notification LED
❹
Display (Touch panel)
• Allows you to scroll the screen on the display
or tap to select objects.

P. 44
❺
m
Menu key

P. 45
❻
h
Home key

P. 45
❼
r
Back key

P. 45
❽
Mouthpiece/microphone
❾
Power key
• Powers the terminal on/off or sets it in sleep
mode.
󱀓
External connector terminal
• Provides connections to the adapters,
earphone/headphone, and PC, etc.
󱀔
Strap slot
󱀕
Infrared data port
• Serves for infrared data exchange.

P. 115
󱀖
Light
• Turn it on when taking a picture as needed.
󱀗
Volume key
• Adjusts the volume.
󱀘
Camera
• You can use the camera to take videos or
photos.

P. 109
󱀙
GPS antenna section*
󱀚
e
mark
• Put the mark close to the reader when using

(Osaifu-Keitai).

P. 130
󱀛
1Seg antenna
• For 1Seg reception.

P. 126
󱀜
UIM slot
• Set the UIM to the slot.

P. 36
󱀝
microSD card slot
• Set the microSD card to the slot.

P. 37
󱀞
Back cover
󱀟
FOMA antenna*
󱀠
Charging terminal
* The antennas are built-in. To ensure good
signal quality, avoid covering the antenna
section with your hands.
NOTE
󱛠
Do not put labels or stickers on the sensors.
Using an earphone
microUSB
plug
*Surface with tabs
downwards
Earphone adapter
External connector terminal cap
Earphone plug
Switch
(to answer an
incoming call)
Microphone
1
Plug the earphone plug into the
Earphone Adapter (sample)
switchside terminal