Instruction manual

30
Contents/Notes
■
Attaching
1
Insert the tab on top of the back
cover into the FOMA terminal
slot, slide it in direction
①
and
push it down securely in
direction
②
Securely push the areas illustrated by and
make sure that there is no space between the
back cover and the FOMA terminal.
Slot
Tab
NOTE
󱛠
When removing the back cover, make sure that
you drain water and wipe moisture off the
FOMA terminal.
󱛠
When attaching the back cover, make sure that
no dust or dirt adheres to the back cover
(especially to the rubber packing).
󱛠
Water might enter the inside of the FOMA
terminal unless you attach the back cover
securely.
NOTE
󱛠
When attaching the back cover, make sure that
the UIM, the microSD card and the battery pack
are attached securely. If the UIM or microSD card
is not securely inserted, the battery pack sits on
the UIM or microSD card which causes a gap
between the FOMA terminal and the back cover
when attaching the back cover. The waterproof
function might deteriorate because of the gap.
To maintain waterproof function,
replacement of parts is required once every
2 years regardless of whether the FOMA
terminal appears normal or abnormal.
DOCOMO replaces the parts as a
chargeable service. Bring the FOMA
terminal to a repair counter specified by
DOCOMO.
Important notices
󱛠
If the FOMA terminal gets wet with water or
other liquids with the external connector
terminal cap or the back cover open, the
liquid may get inside the FOMA terminal
causing electric shock or malfunction. Stop
using the FOMA terminal, turn off the power,
remove the battery pack and contact a repair
counter specified by DOCOMO.
󱛠
The external connector terminal cap and the
rubber packing of the back cover play an
important role in maintaining waterproof
function. Do not remove or scratch them.