VCAT-HD Quick Set-Up Guide Version 1.7.2.
Copyright notice The information contained in this manual is subject to change without notice. Peavey Electronics is not liable for improper installation or configuration. The information contained herein is intended only as an aid to qualified personnel in the design, installation and maintenance of engineered audio systems. The installing contractor or end user is ultimately responsible for the successful implementation of these systems.
1 - Important safety instructions Warning: When using electrical products, basic cautions should always be followed, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. March 27, 2015 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with manufacturer’s instructions.
a) The wire that is colored green and yellow must be connected to the terminal that is marked by the letter E‚ the earth symbol‚ b) colored green or colored green and yellow. c) The wire that is colored blue must be connected to the terminal that is marked with the letter N or the color black. d) The wire that is colored brown must be connected to the terminal that is marked with the letter L or the color red. 19.
2 - Introduction What is VCAT-HD? VCAT-HD is an HDBaseT extender comprising transmitter (VCAT-HD-T) and receiver (VCAT-HD-R). VCAT-HD delivers HDMI video signals and IR and RS-232 control signals over a single STP cable. The maximum transmission distance is 70 meters (230 ft) with CAT5e/CAT6 cable. Features Support for full HD. Delivers high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K). Max transmission distance is 70 meters over single CAT5e/CAT6 cable. High Bandwidth: 10.
3 - Installation and configuration Installing the VCAT-HD devices 1. Connect one end of an HDMI cable to an HDMI video source (such as a Blu-ray DVD player), then connect the other end to the HDMI IN port of the VCAT-HD-T. 2. Connect one end of a CAT-5e or CAT-6 cable to the TP OUT port of the VCAT-HD-T, then connect the other end to the TP IN port of the VCAT-HD-R. 3. Connect one end of an HDMI cable to a video monitor, then connect the other end to the HDMI OUT port of the VCAT-HD-R. 4.
4 - Reference information Specification VCAT-HD-T VCAT-HD-R Input Signal 1 HDMI, 1 IR, 1 RS-232 1 IR, 1 RJ-45, 1 RS-232 Input Connector HDMI, 1/8” 3.5mm IR in 1/8” 3.5mm IR in, RJ-45 Video Signal HDMI 1.4 Audio Embedded HDMI audio Input Output Output 1 RJ-45, 1 IR, 1 RS-232 1 HDMI, 1 IR, 1 RS-232 Output Connector 1 RJ-45, 1/8” 3.5mm IR out 1 HDMI, 1/8” 3.5mm IR out Video signal HDMI 1.
HDMI Standard Supports HDMI 1.4 and HDCP Min.～Max. Level ＜0.3V ~ 1.45Vp-p Impedance 75Ω Temperature -20 ~ +60°C Humidity 10% ~ 90% Power Supply 100VAC ~ 240VAC, 50/60Hz Power Consumption 6.5W Case Dimension L134xW77xH30mm Net Weight 0.8Kg VCAT-HD-T front and rear 1. 2. 3. 4. IR internal receiver. ON: Blinks green when the transmitter is working correctly. LINK: Twisted pair link status indicator. On when the connection is successful.
6. 7. 8. 9. TP OUT: Accepts a single data cable for connection to TP IN port of VCAT-HD-R. HDMI IN: Connector for an HDMI source. IR IN: Connector for IR receiver. IR OUT: Connector for IR transmitter. Notes: If you want to use the IR IN and IR OUT ports on one of the VCAT-HD devices, you must also use these ports on the other VCAT-HD device. When the IR IN and IR OUT ports are connected, the internal IR sensors (labeled IR on the front of each device) are disabled. 10.
9. IR OUT: Connector for IR transmitter. Notes: If you want to use the IR IN and IR OUT ports on one of the VCAT-HD devices, you must also use these ports on the other VCAT-HD device. When the IR IN and IR OUT ports are connected, the internal IR sensors (labeled IR on the front of each device) are disabled. 10. RS232: Serial connector for bi-directional pass-thru communications. 11. 5V DC: External power supply connector.
Warranty statement MediaMatrix® PEAVEY ELECTRONICS CORPORATION DOMESTIC (USA) LIMITED WARRANTY Effective Date: May 1, 2005 What This Warranty Covers This Warranty covers defects in material and workmanship in Peavey MediaMatrix products purchased and serviced in the United States of America (USA). passive filter networks.
MediaMatrix® A Division of Peavey Electronics Corp. 5022 Hartley Peavey Drive, Meridian Mississippi, 39305, USA Phone: 866.662.8750 http://www.peaveycommercialaudio.com/products.
