User manual

  1  '   ) 8 3 8 )   ) 8 3  &     5  



CAUTION!
The CAB 4n series of products are Ethernet (CobraNet ™ ) network products designed to
operate on a network backbone or infrastructure. The design, implementation and maintenance of
this infrastructure is critical to the operation and performance of the CAB 4n Series products.
Peavey Electronics does not support nor service network cabling, hubs, switches, patch bays,
wall plates, connector panels or any other type of network interconnect device. Please ensure
that these components and their associated installation techniques have been properly designed
and installed for CobraNet audio applications. This manual is written specifically for the CAB 4n
Series products. Specific functionality relating to earlier firmware is not covered in this manual. In
the event that your CAB 4n includes an earlier firmware release, you should contact the Peavey
Architectural Acoustics Technical Services Group for information on how this may, or may not,
impact your installation. Installation or upgrading firmware within the CAB 4n is not covered in this
manual.
Several associated products are required to complete a working system using the CAB 4n. This
manual frequently makes reference to these other products, but does not provide specific
configuration or installation information on them. Please refer to the manuals for these products
for information. Every product, both Peavey products and third party devices, must be properly
installed for the CAB 4n to operate in accordance with its published specification. This product is
fan cooled with an intake fan on one side of the unit. The exhaust is located on the other side. Do
not block the fan or any vents when installing this product. Proper cooling is essential to maintain
proper operation and long-term stability in this product. Install this product in EIA approved
equipment racks only.
The information contained in this manual is subject to change without notice. Peavey Electronics
is not liable for improper installation or configuration. The information contained herein is intended
only as an aid to qualified personnel in the design, installation and maintenance of engineered
audio systems. The installing contractor or end user is ultimately responsible for the successful
implementation of these systems.
