Product specifications

MWN-WAPR300N
21
 Upload/Download: specifies the traffic direction for the selected IP addresses.
 Bandwidth Range: The maximum and minimum upload/download data traffic of
the hosts in specified IP range. The unit is KByte/sec. The uplink of upload and
download cannot exceed the WAN port bandwidth limitation range (by default is
1500 or 1492).
 Enable: enables the current edited rule. Otherwise, the rule will not go into
effect.
 Add to list: After you edit the rule, click the “Add to list” button to add the current
rule to the rule list.
Here we take 2Mbps bandwidth as an example. Theoretically, the biggest downloading
rate for 2Mbps bandwidth is 2Mbps=256KByte/s, and the biggest uploading rate is
512kbps=64KByte/s
Example 1
If you want to set the download rate of the computer at the IP address of 192.168.8.2 as
80-90KByte/s, upload rate as 10-15KByte/s, first add one upload rule as shown in the
picture below:
1. Enter 192.168.8.2 in the both IP address fields
2. Select upload in the Upload/Download field.
3. Enter 10-15 in the bandwidth range field
4. Select “Enable”
5. Click “Add to list”
6. Click “Apply” to finish the upload rule settings.