User guide

MWN-WAPR150N Wireless-N Broadband Router

Frequently Asked Questions



12

MedialinkProducts|1951OldCuthbertRoadSuite301CherryHillNJ08034|Phone:856‐216‐8222

support@medialinkproducts.com|www.medialinkproducts.com

Resetting the Router:

Hold the recessed Reset pinhole in the back of the router for 8 seconds. You will have to

reconfigure your SSID and Password after resetting the router

7b. How do I setup my Networked Printer with the Medialink MWN-WAPR150N?

A networked printer must be configured through the printer’s control panel. If you are replacing

an existing wireless router with this Medialink Wireless Router, you will need to reconfigure the

networked printer with the correct IP Address and Gateway and then reinstall the printer on the

client computers that you wish to access it. The default IP Address of this Medialink router is

192.168.0.1. Please see your printer’s manual for further instructions as every printer is different

and requires different configuration.

8b. My Apple devices sporadically drop their internet connection but they say they are

still connected to the network.

This problem is often reported by MacBook users. A fix that was posted on a MacRumors forum

that seems to help is the following:

Turn off Airport > Go to “Macintosh HD > Library > Preferences > System Configuration

Then find the file named “com.airport.preferences.plist”. Drag the file to the desktop to copy it

there. Then delete the file from the System Configuration.

Once the file is deleted, turn the Airport back on and reconnect to the network. A new file will be

created in its place and it should fix the drops.