MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions Medialink Wireless-N Broadband Router FAQ Click on any text below that looks like this to jump to that section. Frequently Asked Questions For: A. Installing Your Router B. Setting Up Your Wireless Devices C. Additional Configuration / General Questions 1 Medialink Products | 1951 Old Cuthbert Road Suite 301 Cherry Hill NJ 08034 | Phone: 856‐216‐8222 support@medialinkproducts.com | www.medialinkproducts.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions A. Frequently Asked Questions: Installing Your Router Click on any question below to be directed to the answer. 1. How do I login into the web-based GUI (modify the settings) on my router? 2. Is my modem compatible with this router? 3. Does this router support my operating system? 4. If I plug into the router with my computer, I can get online but then when I unplug my computer from the router I can’t. Why is that? 5.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions A. Frequently Asked Questions: Installing Your Router 1a. How do I login into the web-based GUI to modify or review the settings of my router? Launch a web browser such as Internet Explorer, Firefox, or Safari and in the address bar enter the router’s default IP address, 192.168.0.1, then Press “Enter”. When prompted, type in the username and password to your router (default is “admin” for both).
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 5a. How do I change the default login information (Username and Password) for the router from “admin” to something else? You do not normally need to change this information because in order to access the router’s settings, one would have to be connected to the router using the Wireless Password or be plugged into the router directly.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 8a. Do I need to install the CD on every computer in my network? You do not need the CD to install the router on any computer. The CD provides a user-friendly setup wizard that helps you connect to the router and configure its wireless settings.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 11a. I have a DSL connection and I cannot access the internet. There are 3 different variations for connecting a router to a DSL modem, please see the updated Quick Installation Guide for DSL Users or Section 2.2, Page 23 of the User Guide for more detailed installation instructions, posted online at www.medialinkproducts.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 15a. The Time Zone Settings will not save to my Time Zone when I click Apply. This is a known issue that will be fixed in the next firmware upgrade. In order to save the Time Zone correctly you must choose the corresponding Time Zone in the table below: For Eastern: Choose (GMT-02:00) Mid-Atlantic For Central: Choose (GMT-04:00) Caracas, La Paz For Mountain: Choose (GMT-07:00) Arizona For Pacific simply choose Pacific.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions B. Frequently Asked Questions: Setting Up Your Wireless Devices Click on any question below to be directed to the answer. 1. Is my wireless device compatible with this router? 2. All of my devices connect to the network except one laptop running Windows Vista or XP. 3. My wireless device says it is connected to the internet wirelessly but I can’t access the internet. 4. If I have legacy 802.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions B. Frequently Asked Questions: Setting Up Your Wireless Devices 1b. Is my wireless device compatible with this router? This router can support any wireless devices that can receive a wireless signal via 802.11b/g/n 2.4Ghz wavelengths (which is nearly all wireless devices). This router does not support Dual Band or 5Ghz wavelengths. Also, each wireless device has its own limitations such as supported security modes.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions Open an internet browser and type the IP address of the router into the address bar (192.168.0.1) Enter the default UN and PW "admin" for both Then click on WLAN Settings>Security Settings Change the Security mode from WPA-Personal to Mixed WEP Make sure default key is set to Key 1 Next to Key 1 change the character type from "Hex" to "ASCII" Enter a password that is exactly 13 characters.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions Mac Users: Apple Menu > System Preferences > Network > Airport > Advanced or Configure > Configure IPv4 > Select “Using DHCP”. 4b. If I have legacy 802.11b or g clients on the wireless network at the same time, will the speed of my network be affected by the slower clients? Each device will connect to this router at its own fastest rate. Your B devices will connect at up to 11Mbps, G devices up to 54Mbps, and your 2.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions Login to the Router > System Tools > Reboot > Reboot the Router Resetting the Router: Hold the recessed Reset pinhole in the back of the router for 8 seconds. You will have to reconfigure your SSID and Password after resetting the router 7b. How do I setup my Networked Printer with the Medialink MWN-WAPR150N? A networked printer must be configured through the printer’s control panel.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions C. Frequently Asked Questions: Additional Configuration / General Questions Click on any question below to be directed to the answer. 1. How do I change the IP address of the router? 2. After I change the IP address of the router, the internet browser says it cannot display the page. 3. What is the range of this router? 4. I have to use Mixed WEP security because of the limitations of some of the devices on my network.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 2. After I change the IP address of the router, the internet browser says it cannot display the page. Once the router reboots, your computer may lose connection to the router. Simply restart the computer or renew the DHCP lease and it will reconnect and be able to access the router using the new IP address.
MWN-WAPR150N Wireless-N Broadband Router Frequently Asked Questions 6. What can I do if the problems I am experiencing do not fall under any of the categories above? When in doubt, reset the router. The reset button is on the back of the router between the WPS button and the first yellow Ethernet port. Use a small object like a paperclip to press in the button and hold it in for 8 seconds. Your name of your network and security settings will go back to default so you will have to reconfigure them.
