Product specifications

MWN-WAPR150N Wireless Router
used as additional access points. The secondary routers
must be set to “Bridge” or “Repeater” when this option is
selected.
 Bridge: Setup a secondary router as a wired or
wireless access point. Connect an Ethernet cable to the
LAN port of the Primary router and connect the other
end to a LAN port of the Secondary router. (Primary
router must be set to “Lazy”). Click “Open Scan” and
select the MAC address of the Primary router to connect
the two devices and establish a wider network.
 Repeater Mode ： Setup a secondary router as a
Wireless Access Point. (Primary router must be set to
“Lazy”). Click “Open Scan” and select the MAC address
of the Primary router to connect the two devices and
establish a wider network.
 Encrypt Type: Select one from WEP, TKIP, AES for
security here. (Note: It is recommended to leave this
disabled and only use the WLAN Security Settings
instead.)
 Pass phrase: Enter the encrypted key for wireless
devices. (Note: It is recommended to leave this
disabled and only use the WLAN Security Settings
instead.)
 AP MAC: Input the MAC address of another (opposing)
wireless router you want to connect.
 Reboot the Router: Click “System Tools->Reboot”
when finished configuring WDS.
44