Product specifications

MWN-WAPR150N Wireless Router
5. “Bridged Mode” might be called “Transparent Bridge
Mode”, or “1483 Transparent Bridged Mode”.
6. Once the modem is set to Bridged, it will reboot. At
this point your computer will no longer have access
to the internet.
7. Connect the router between the modem and the
computer using network cables.
8. Access the Router’s GUI (See Chapter 3.2 Login to
the Router)
9. Click Next on the Setup Wizard.
10. Select “ADSL Virtual Dial-up via PPPoE” and click
Next.
11. When prompted, enter your DSL username and
password, click Next.
12. Restart the computer (See Chapter 3.2 – Step 4 to
Configure your Wireless Network)
2.1b No Modem Access
1. Open your internet browser and in the address bar
type the IP address of the router (default is
192.168.0.1). Enter the username and password
(‘admin’ for both) when prompted and click “ok”.
2. Click on “System Status”
3. Click “Release” then “Renew”
4. Click “System Tools>Reboot”. Reboot the router and
12