Product specifications

MWN-WAPR150N Wireless Router
5. Power On your Cable/DSL Modem
a. Plug in the power cord for your modem.
Reinstall the batteries (if applicable).
b. Wait 30 seconds for the modem to fully
restart.
6. Power on your Medialink Router and Check the
Status Lights.
a. Connect the AC/DC Adapter to the router’s
Power port. Connect the other end into an
electrical outlet. Wait 30 seconds to allow
the router to fully start.
7. Check the status of your Medialink Router.
a. On the front panel of your Medialink Router,
the POWER and WAN (Internet). The SYS
and WLAN LED’s should be blinking. If not,
make sure the cables are connected
correctly.
8. Power ON your computer
a. Turn on your computer
b. It is recommended that you temporarily turn
off any third party firewalls or networking
software during installation of your Medialink
9