User manual

KNR-p4Px4 KNR-p16Px8 User Manual

Figure 5. 29 Unlocking Attention

Protect file by setting HDD property to Read-only

Steps:

1. Enter HDD setting interface.

Menu> HDD

Figure 5. 30 HDD General

2. Click to edit the HDD you want to protect.

Figure 5. 31 HDD General- Editing

Note: To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter Managing HDD

Group.

3. Set the HDD property to Read-only.

4. Click OK to save settings and back to the upper level menu.

Notes:

1. You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to R/W.

2. If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live view mode is

available.