User manual

KNR-p4Px4 KNR-p16Px8 User Manual
48
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which the PTZ
will follow while cycling through the patrol. The Duration refers to the time span to stay at the corresponding
key point. The Speed defines the speed at which the PTZ will move from one key point to the next.
Figure 4. 7 Key Point Configuration
5. Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
Click the icon to delete the corresponding key point, and click the trash icon to.delete all the key points.
Select a key point, then click or button to adjust the order of the key points.
Figure 4. 8 Key Points Deletion
4.2.4 Calling Patrols
Purpose:
Calling a patrol makes the PTZ to move according the predefined patrol path.
Calling patrol in the PTZ setting interface:
Steps: