User manual

KNR-p4Px4 KNR-p16Px8 User Manual
33
Figure 2. 23 Camera List
Note: The cameras connecting to the PoE interface cannot be deleted in this menu.
2. Click the button, and select the Adding Method in the drop-down list.
• Plug-and-Play: It means that the camera is connected to the PoE interface, so in this case, the parameters
of the camera can’t be edited. The IP address of the camera can only be edited in the Network
Configuration interface, see Chapter 9.1 Configuring General Settings for detailed information.
Figure 2. 24 Edit IP Camera Interface - Plug-and-Play
• Manual: You can disable the PoE interface by selecting ‘manual’; the current channel can be used as a
normal channel and the parameters can also be edited.
Figure 2. 25 Edit IP Camera Interface - Manual
3. Click the Apply button to finish adding.