User manual

KNR-p4Px4 KNR-p16Px8 User Manual

2.1 Starting Up and Shutting Down the NVR

Purpose:

Proper startup and shutdown procedures are important to reliable operation of the NVR.

Before you start:

Check that the voltage of the power supply matches the NVR’s requirement, and the ground connection is made.

Starting up the NVR:

Steps:

1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible

Power Supply (UPS) be used in conjunction with the device.

2. Turn on the power switch on the rear panel.

3. After startup, the Power LED indicator turns on. A splash screen appears on the monitor. The row of icons at the

bottom of the screen shows the HDD status. ‘X’ means that the HDD is not installed or cannot be detected.

Shutting down the NVR

Steps:

1. Enter the Shutdown menu.

Menu > Shutdown

Figure 2. 1 Shutdown Menu

2. Click the Shutdown button.

3. Click the Yes button.

4. Turn off the power switch on the rear panel when the attention pops up.