User manual

KNR-p4Px4 KNR-p16Px8 User Manual
141
2. Click the Network Detection tab to enter the Network Detection interface.
3. Select the backup device from the dropdown list of Device Name, as shown in Figure 9. 31.
Note: Click Refresh button if the connected local backup device cannot be displayed. When it fails to detect the
backup device, please check whether it is compatible with the NVR. You can format the backup device if the
format is incorrect.
Figure 9. 31 Export Network Packet
4. Click Export to start exporting.
5. After the exporting is complete, click OK to finish the packet export, as shown in 0.
Figure 9. 32 Packet Export Attention
Note: Up to 1M data can be exported each time.
9.4.3 Checking the Network Status
Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click Status button on the right bottom of the page.