User manual

KNR-p4Px4 KNR-p16Px8 User Manual
129
Figure 9. 9 Register an Account
3) In the Device Management interface, click to register a device.
Figure 9. 10 Register the Device
Note: The device name can only contain the lower-case English letter, numeric and ‘-’; and it must
start with the lower-case English letter and cannot end with ‘-’.
IF THE WAN PORT USED FOR HTTP ACCESS IS OTHER THAN 80, IT IS ESSENTIAL
THAT YOU ENTER THE ACTUAL WAN HTTP PORT INTO THE REGISTRATION
DATA.
Access the Device via Web Browser or Client Software
After having successfully registered the device on the SIMPLEDDNS server, you can access your
device via web browser or Client Software with the Device Domain Name (Device Name).
Task 1: Access the Device via Web Browser
Open a web browser, and enter http://www.simpleddns.com/alias in the address bar. Alias refers to
the Device Domain Name on the device or the Device Name on the SIMPLEDDNS server.
Example: http://www.simpleddns.com/nvr
Note: If you mapped the HTTP port on your router and changed it to a port number other than 80,
(Refer to Chapter 9.2.10 for the mapped HTTP port number) you must enter the mapped port info
into the SIMPLEDDNS setup for the NVR so that port information is included when you are
redirected from SIMPLEDDNS.COM/alias to your NVR.
Task 2: Access the devices via CMS
For CMS, in the Add Device window, select and then edit the device information.