U-DRIVE DVR Car DVR Device MT4036 User Manual
EN Introduction Product overview Thank you for buying MT4036 U-DRIVE DVR. It is a camera especially designed for recording movies from driver point o view. Wide angle lens, HD movie quality with sound, SD card slot and other features will allow you to enjoy every trip in your car. Please take a moment and read this manual before using the device. Package contents ¯ MT4036 ¯ Car charger (input DC12/24V input, output DC 5V) ¯ Windshield mount ¯ USB cable ¯ AV cable ¯ User Manual 2 1. 2. 3. 4. 5. 6. 7. 8.
Installation Steps 1. Unpack the content of the package. 2. Fully charge the device before first use. Connect device to USB port of PC computer as shown below. After 3-4 hours rechargeable battery is fully charged. 3. You can also use attached car charger, one end plug to DC 5V socket, other end plug to car cigarette lighter socket.
EN 1 4. Insert a formatted SD/SDHC card into SD card slot as shown below: REC 2 HD 4 5 00:11:09 SD 6 3 8 5. Press ON/OFF button to power on the device. Device will start o record automatically. 4 1. 2. 3. 4. 5. 2011-01-22 22:28:08 7 Mode icon. Resolution mode icon. Indicates when the built-in IR LED is turned on. REC icon will flash when recording video. When recording this indicates the current recording duration.
Two ways to start the car recorder: When used with built-in battery Press “ON/OFF” button once to power on the device, press again to power off. Charging: connect DVR recorder to PC computer using USB cable. Green and red LED indicator will be on, when fully charged red LED is off. When connected to car charger Device will automatically detect power from car lighter socket and device will turn on. Start engine, device will start record automatically.
EN DSC mode Power on the device and press “MODE” button to enter DSC mode. To take photo press “REC/SNAP” button. Press “MENU” button to enter DSC settings. Press “UP” or “DOWN” button to navigate, then press “REC/SNAP” to enter submenu. 1. Image Size: [5M 2560x1920/3M 2048x1536/2M 1600x1200/1M 1280x1024] 2. Time Stamp: [On/Off ] 3. Night mode: [disable/auto] Playback mode Power on the device and press “MODE” button twice to enter playback mode.
