Operation Manual

11
EN
Troubleshooting
Problem Potential Reasons What to do
No picture Power isn’t connected Connect the power
The power switch is not on Switch on the power
Screen shows “No Signal” Not connect DVB-T cable Plug in the DVB-T cable
Incorrect setting Set up correct parameter
No sound from speaker No or incorrect connection with audio
cable
Connect the audio cable correctly
Mute the sound Switch on the correct volume control
Incorrect sound track Try another sound track
Only sound, no image
on the screen
No or incorrect connection with AV
cable
Connect the audio cable correctly
The program is a radio program Press <TV/RADIO> key to shift into
TV mode
Remote control unit is not
workable
The battery is exhausted Change new battery
Remote control unit is not in the right
opposite of the front panel or too far
from it
Adjust the way of holding remote
control unit and near from the panel
The image stop suddenly
or mosaic
The signal is too weak Strengthen the signal