User`s manual

Make sure that the connection is right. Then connect

the power adapter and put the batteries into the re-

mote control. Press “MENU” key on the remote control.

Press “CH-” key and move to “Scan”. Then press “VOL+”

to enter the auto-scan channel preview window, and

press “CH-” to move to TV system, choose the input

“CABLE” or “AIR” according to the connection of TV sig-

nal. Move the scroll bar to “FAST SCAN” option, press

“VOL+” to start scanning. It will take some minutes to

scan the channels, and after that the screen will show

the ﬁ rst channel it searched.

Please do not cut the pow-

er oﬀ or do other operations during the searching, other-

wise it will miss some channels. Users only need to search

the channels for one time after ﬁ x the connection.

Choose channel / Mute

After you ﬁ nish searching the channels, press “CH+/-”

and choose the channel, press “VOL+/-” to adjust vol-

■ Setup – setting OSD position and displaying, ad-

vanced settings:

■ Time – setting time

for switching on/oﬀ

■ Audio – setting audio parameters:

■ Calendar – calendar

setting

Search (Only in TV status)