User`s guide

Speciﬁ cation:

■ standard RF socket (for TV antenna or cable)

■ standard S-Video input

■ standard AV input

■ audio input (stereo)

System requirements:

■ OS: Windows 2000 SP4/ XP SP2 /Vista 32bit

■ processor: Pentium 4 1,4 GHz or higher

■ RAM: 256MB lub or more

■ graphic card SVGA

■ sound card

■ 500MB of free hard disk space or more

■ CD-ROM drive

■ free PCI slot

■ compliant with DirectX 9.0c or higher

Package contents:

■ USB TV BOX XTREME

■ remote controller

■ user’s manual

■ USB cable

■ AV adapter (S-Video –> cinch)

■ audio adapter (jack –> cinch)

■ software CD (drivers and application)

Device Installation Steps:

Note! Read installation steps before connecting the

device.

1. Put software CD into drive, if application does not

start automatically, run „SETUPTV.EXE” ﬁ le, then TV

BOX installation window should appear.

Select „Install DirectX 9.0c” to install required DirectX

components (you can skip this step in Windows Vista).

Follow on-screen commands, if restart will be required

after reboot run again „SETUPTV.EXE” from CD.

3. Use USB cable to connect TV BOX to free USB 2.0

port of the computer. Make remaining connections

according to following diagram: