USB TV BOX XTREME MT4156 User’s Guide
EN Contents Introduction .................................................................................2 Features..........................................................................................2 Specification.................................................................................3 System requirements ................................................................3 Package contents .......................................................................3 Device Installation Steps .......
Specification: ■ ■ ■ ■ standard RF socket (for TV antenna or cable) standard S-Video input standard AV input audio input (stereo) System requirements: ■ ■ ■ ■ ■ ■ ■ ■ ■ Device Installation Steps: Note! Read installation steps before connecting the device. 1. Put software CD into drive, if application does not start automatically, run „SETUPTV.EXE” file, then TV BOX installation window should appear.
In some versions of Windows a massage box can appear, showing that installed driver has no Windows logo. Click “Continue anyway” and system will go on with installation. EN When you plug device to USB port system will find new hardware, select „Install Device Driver” from TV BOX installation window. If driver installation is finished a message box will appear, and „Found New Hardware Wizard” window will be automatically closed.
4. From TV BOX installation window select „Install Remote Control” and then click “Install”. On next screen mark option„I accept the terms of the license agreement” and click “Next” 5. The last step is installation of honestech TVR, from TV BOX installation window select „Install Application”. When following window will appear click “Next”.
EN Click „Next” to confirm program folder When following window appear enter product key and click „OK” After honestech TVR software is started, view window and application control panel are as below: Click „Finish” to end installation of honestech TVR. You can also close TV BOX installation window, press ALT+F4. 6. When you run application for the first time you have to enter Product Key. You can find it in text file „SN. TXT” on software CD or on the envelope of CD.
Application control panel is operated as follows: Utility icons EN Property settings This icon opens dialog window where you can set all settings to watch, seek and record TV programs.
EN 8 Category Setting TV signal from Antenna (TV) or Cable (CATV) Country Auto detect: automatically choose country of reception Select your country: manually select country of reception Operation method Order of stored channels: By Channel Number or By Order Number. For instance (look at picture above), to select channel 27 enter “27” on remote controller if you have chosen option „By Channel Number” or enter “2” on remote controller if you have chosen option “By Order Number”.
Video setting tab Video source Video decoder tab: select video standard. To save changes click „apply”, then „OK” and then restart application. Don’t change other options on this tab. Video Proc Amp tab: video adjustment Fine Adjustment Setting Brightness, Contrast, Hue and Saturation. Press „Default” to restore default settings. Video capture device Select „OEM 5600AI„ as your video capturing device.
EN Record setting tab Etc Dialog tab Profile Select different recording format. Select MPEG1 or MPEG2 to manually set parameters (some knowledge of video compression is needed) or select other profiles with pre-definite parameters.
EN Schedule recording Click this icon to open dialog box of schedule recording. Add – set a new schedule for recording Edit – rename a recorded video file Delete – delete selected video file Delete All – delete all video files from the list OK – confirm all setting and exit Cancel – cancel all setting and exit Channel surfing Click this icon to open channel surfing window, channel previewing is done according to parameters set in „Property Setting”. Click “exit” to close channel surfing.
EN Audio Mode Click this icon to switch between mode: mono, stereo and main.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Close the menu Screen: Full, Normal, Minimize Select resolution: 352x288, 640x576, 720x576 Aspect ratio: 4:3, 16:9 Channel Up Channel Down Auto Scan Channel Surfing Property Setting Schedule Recording Mute Always on top Show control panel Exit Timeshift: activate/deactivate timeshift mode Stop: stop playing recorded video Snapshot: take a snapshot EN Remote Controller Power: close application and shutdown system Off: open/close honestech TVR application Recall: back to last vie
EN Troubleshooting Q: System could not find device. A: Connect TV BOX directly to USB 2.0 port, problems may occur when you connect via USB hub. Try connecting device to another USB port, or use another usb cable. When connection is good the red led is on (looking at upper side of TV BOX). Q: Unable to run honestech TVR, only message „Could not initialize capture device” appear. A: Error could cause other video capture devices that were installed before TV BOX.
EN For more information, drivers, instruction manuals, please visit our website: www.media-tech.eu Manufacturer is restricting right to modernize and making changes of this device. In accordance with continuous development of hardware and software some functions demonstrated on pictures might be presented differently in the future.
EN 16
