Instruction manual

Step 2: After clicking on Custom Settings(C), a security set-

tings window shall appear.

Change ActiveX Control Options and Plug-ins settings to

the following:

1. Download signed ActiveX controls: Enable

2. Download unsigned ActiveX controls: Enable

3. Initialize and script ActiveX controls not marked as safe:

Enable

4. Run ActiveX controls and plug-ins: Enable

5. Script ActiveX controls marked safe for scripting: Enable

Step 3: After pressing “OK”, a warning window shall appear.

Click on “Yes” (Y), and you shall return to the last window.

Press “OK”, and the setup is completed.

Step 4: At this time, the computer should display a warning

window then press “Yes” (Y).

Step 5: When completed,

you may begin viewing the

surveillance image for the

ﬁ rst time as shown.

NOTE: This action loads ActiveX components from the

MT4009 System to a local machine.

3.3 TAKE A SHOT

This function allows users to capture the screen shot as a

photo, and save it on the computer.

Directions:

Step 1: Go to the “LiveView” menu, and go to the live image.

Step 2: Select an image, and hold down the Ctrl key.

Step 3: Place the cursor on the surveillance image and left

click with your mouse. The captured image should ﬂ ash

momentarily: (or press the “Snapshot” button).

Step 4: Release the Ctrl key, and the single still shot image

has been successfully captured.

Step 5: Select the “CaptureView” menu to browse through

the captured images.

TOP