Instruction manual

Step 2: The system login window will appear in IE as

shown:

Step 3: Enter Account ID and Password

Step 4: Press “Submit” to conﬁ rm, and the a network sur-

veillance window shall appear, as shown:

Step 5: Enter “admin” as the Account ID, and “password” for

the password.

Step 6: If a mistake has been made, press “Cancel” , and en-

ter login information again.

3.2 LIVEVIEW

When using IP WEBCAM for the ﬁ rst time, users must

change the IE security settings (please refer to settings

step 3.2.1). Otherwise, the system will display the follow-

ing warning, and be unable to display the surveillance

feeds.

After having successfully set up the IP WEBCAM settings

during the ﬁ rst use,

users do not need

to change the set-

tings again for later

use.

3.2.1 The IE security settings can be changed

by following the

steps below:

Step 1:

IE Toolbar ---> Tools -

--> Internet Settings

---> Security --->

Custom Settings (C)

TOP