Instruction manual

2.3 TV OUT Function Introduction

3. TV_OUT Operation :

■ Push to Ch-Flk: Press Reset switch button once, you can

adjust Ch-Flk 50Hz, 60Hz, Outdoor.

■ Hold to Exit: Press and hold down for 2 seconds, Exit Ch-

Flk window.

Reset

Switch

TV OUT Default setting is NTSC system, please press

Reset switch and hold on for 3 seconds to change to

PAL system.

1. Connect the AV cable between TV set and IP WEBCAM as

the drawing.

2. Press RESET switch and plug in power adaptor at same

time, continuously hold on your press on RESET switch

for 2 seconds then release the press, the IP WEBCAM will

enter into “TV Out mode”.

3. Getting Start

3.1 SYSTEM LOGIN

System login is the process of identifying all people try-

ing to log into the system, as to conﬁ rm user identify, and

granting authorized users access to the system’s functions.

This system provides two layers of security access: “admin-

ister” and “general user”. After a successful login to the sys-

tem, users can begin to access both surveillance and set-

ting functions, follow the steps below:

Step 1: Open the login window, as shown below.

Directions: Using the

CAM EZ Search applica-

tion, select the MT4009

EZ IP WEBCAM menu,

and click twice.

TOP