Instruction manual

23
Q: If we I forget my IP password or address settings, how
can I fi nd the IP Camera?
A: f you’ve forgotten your IP password or address settings, please
hold down the reset button for fi ve seconds to reset the system
to factory default.
Q: What should I do if mail cannot be sent out from the
MT4009?
A: f the system is unable to send mail from the MT4009 for any
number of reasons, the action will automatically be canceled,
and not be repeated.
Q: How can I connect to MT4009 IP WEBCAM from the my
offi ce?
A:
(1) Check your IE browser security settings.
IE Browser Tool bar > Tools > Internet Settings > Security.
Click on Custom Settings, and a security window will open up.
Change your ActiveX Control and plug in settings to match the
following:
1. Download signed ActiveX controls: Enable
2. Download unsigned ActiveX controls: Enable
3. Initialize and script ActiveX controls not marked as safe: En-
able
4. Run ActiveX controls and plug-ins: Enable
5. Script ActiveX controls marked safe for scripting: Enable
(2) We recommend that you turn off the proxy server function. To
do this, please use the following procedure:
Go to Internet Settings (O) > Connection > Local Network Set-
tings (L) > Choose not to use proxy for the local network.
(3) In your IE browser, go to http://mjIP WEBCAM001.dyndns.org,
and connect to mjIP WEBCAM001. If the domain name is not
translated for any reason, go directly to the actual IP address:
211.78.174.94.
(4) After connecting to the System Login window for mjIP WEB-
CAM001, enter the account ID and password as shown below:
AccountID : user
PassWord : user
(5) While using mjIP WEBCAM001 for the fi rst time, you need to
install the ActiveX components.
This is why a warning should appear prompting you to install
the fi le HTTP://XXXX.XX..XX/view.cab. Click on “yes”.
(6) Please wait a moment for the ActiveX components to fi nish
installing. You should be able to view mjIP WEBCAM001 after
installation is completed.
TOP