Instruction manual

22
Step 2: You may also view the surveillance video from the
MT4009 EZ IP WEBCAM via a browser from a remote con-
nection (such as your offi ce) by entering a preset DDNS
address (such as mjIP WEBCAM001.gotdns.com). asmjIP
WEBCAM001.gotdns.com).
APPENDIX B. FAQ
Q: Why is the time that is displayed on the image incor-
rect?
A: Make sure that the SNTP settings are correct, especially with
regard to the gateway connecting properly to the Internet.
Also, make sure that the SNTP Server that you entered is setup
correctly. The system should calibrate itself when fi rst connect-
ing to the SNTP on startup, and then calibrate afterward once
every hour.
Q: Why can’t I update my IP Address?
A: Make sure that there are no other devices with the same IP Ad-
dress as the MT4009. If they are the same, try to connect the
MT4009 only to your computer to make sure there is no inter-
ference from any other device. You may then change your IP
Address.
Q: Why is it that the IP Search Tool can detect the MT4009,
yet my IE browser cannot?
A: This is because your IE browser settings are not set up to cor-
rectly browse the MT4009. We recommend that you turn off the
proxy server function.
To turn off the proxy server function in your IE browser, please
use the following procedure:
Go to Internet Settings (O) > Connection > Local Network Set-
tings (L) > Choose not to use proxy for the local network.
Q: Can mail be sent if “SD” is not selected?
A: Yes. The “Save in Flash Card” and “Mail Image” functions can be
conducted at the same time.
TOP