Instruction manual

21
Step 4: Select “Internet
Protocol (TCP/IP)”, and
click on the Properties
(R). Click on “OK”.
Step 5: Select “auto-
matically retrieve IP
Address (O)” and “Au-
tomatically retrieve
DNS server address
(B)”. Click on “OK”.
D. Using the MT4009 EZ IP WEBCAM with DDNS Viewer.
Step 1: Open CAM_EZ Search, and Click on Update. Wait for
about 60 seconds (actual time dependent on the quality of
your connection), and the MT4009 EZ IP WEBCAM should
be detected automatically. Click on the EZ IP WEBCAM to
view its IP and Gateway settings. If the system detects a
fl oating IP address, submask, or gateway that cannot be
changed, it means that the MT4009 EZ IP WEBCAM on the
local network has been successfully connected via a PPPoE
connection, as shown below:
1.
2.
3.
At this time, you may select the EZ IP WEBCAM that has
been detected. Your browser should automatically open to
the EZ IP WEBCAM login window.
TOP