Instruction manual

Step 4: You may also click “browse” to search for the ﬁ le you

wish to update.

Step 5: Click “Submit” when you are ﬁ nished.

Step 6: At this time, the system will begin to upload the ﬁ le.

This should take 7-10 seconds for networks with 100Mbps

connections.

Step 7: The system will automatically begin a 50 second

countdown. If the process is successful, the words “Update

completed! System will auto reset after 3 seconds!” shall

appear.

Step 8: The system will return to the “System Login” screen.

Re-enter your Account ID and Password, and you’re ﬁ n-

ished.

Step 9: You may now check “Current Version” to make sure

that the update was successful.

NOTE: After completing Step 6, please do not discon-

nect the IP WEBCAM, or the unit may become dam-

aged, and require to be taken back to the factory for

repairs.

Appendix

APPENDIX A.

Using a PPPOE dialup connection and DDNS with the

MT4009 EZ IP WEBCAM (Using a hub)

This section is intended to help users connect to a com-

puter to the MT4009 EZ IP WEBCAM via a hub. It shall also

describe how to connect to ADSL with a PPPoE type IP ad-

dress, and also how to connect to the MT4009 EZ IP WEB-

CAM using DDNS. The directions are as described below:

A. Apply for a DDnS account using your home computer.

B. Connect to the MT4009 EZ IP WEBCAM with your home

computer (using the CAM EZ Search Tool).

C. Setup your MT4009 EZ IP WEBCAM to connect via PP-

PoE, and enter your DDNS settings.

D. You may now view your EZ IP WEBCAM with DDNS viewer.

A. Applying for a DDNS Account with Your Home Com-

puter

To do this, you must ﬁ rst have a Cable/ADSL Ethernet

modem (with RJ-45 connectors), and make sure that your

TOP