Instruction manual

10
■ Anti-Flicker: Users can select between 60Hz, 50Hz, or
Outdoor. The default setting is 50Hz. Please change to
“outdoor” when shooting outside.
■ Audio: Audio output. Default setting is “off ”.
■ Rotate 180: Image reverse. Default setting is “off ”.
■ IR Auto Detection: IR LED control. Default setting is “off ”.
Image Setup Directions:
Step 1:
Click on “ImageSet” to view the menu.
Step 2:
After entering the desired values, click on “Submit”.
Step 3:
If you wish to cancel your changes, click on “Cancel”.
5.2 Capture View
This view includes;
- Manual capture of still images using LiveView.
- Automatic capture of still images via MD.
How to Use Capture View:
Step 1:
Click on CaptureView to enter the menu.
The menu is capable of displaying up to 48 images, view-
able on three pages.
Step 2:
You can set the system
to read from either your
computer or your fl ash
card.
After making your se-
lection, click on “Apply”.
Step 3:
Select desired thumb-
nail image using the
cursor to view image at
the default dimensions.
TOP