User Manual

3
EN
Remote control
1. Standby
2. Repeat mode*
3. Mode shift:
Bluetooth/AUX-in/
FM/USB/SD
4. Previous track/radio
channel
5. Next track/radio
channel
6. EQ*: normal/bass/pop/
rock/jazz.
7. Play/Pause
8. Volume down
9. Volume up
10. Mute
11. Numeric keypad
12. Stop
*)works only in SD/USB mode
Charging
Use supplied USB cable and plug into device
charger socket. Full charging takes ca. 6 hours.
Device can be normally used during charging.
Note! Fully charge device before rst use.
Important! During charging you can normally use the de-
vice, however it is recommended to perform 3 full charg-
ing cycles rst in order to format built-in battery.
Power on/o
Switch POWER button into “ON” position to power on
the device, switch into “LIGHT” to power on and enable
illumination. You can also use remote control to en-
able/disable standby mode.
Switching modes
Use MODE button to switch between modes: Blue-
tooth/SD/USB/FM radio/AUX-in. Actual mode is dis-
played on the status screen.
Volume control
Use main volume knob to set overall volume level. Use
echo knob to set echo eect for microphone , use mic/
vol knob to set microphone input level.