Manual

4
EN
8� Click Install to install the drivers and utility�
9� If it is necessary to reboot the computer, select Yes,
I want to restart my computer now, to restart the
computer after the installation, or No, I will restart my
computer later, to restart the computer later�
10� Click Finish to complete the installer operation�
Conguration utility
Icon in the system tray
When the adapter is properly connected to the computer
and the drivers installed, the conguration utility will be
started with the system, and its icon will be displayed in
the system tray (next to the clock)� The icon changes ac-
cording to the adapter and/or wireless network connec-
tion status�
Client mode (wireless station):
Double click the icon to open the conguration utility
main window� Right-click the icon to display the context
menu:
■ Launch Cong Utility – open the utility main window�
■ Switch to...Mode – switch the adapter operation mode:
 •wireless station (Switch to Client mode)
 •access point (Switch to AP mode)
 •wireless station and access point (Switch to AP
Client+ mode) – Windows 7�
■ Exit – close the conguration utility icon�
The adapter is not connected to the computer�
Either the adapter is not connected to a wireless
network or the transmission is o�
The adapter is connected to a wireless network
and the signal strength is good�
The adapter is connected to a wireless network
and the signal strength is normal�
The adapter is connected to a wireless network
and the signal strength is poor�
The adapter is not connected to the computer�
Preparing the adapter for operation�
Adapter ready for operation�
AP mode (access point):
Main window – Client mode
In Client mode, the adapter works as a normal wireless
adapter� It is possible to connect to wireless networks in
the range�
2
1