Manual

3
EN
menu should launch automatically� Under Windows
Vista and Windows 7, you may also need to click Run:
Autorun.exe in the AutoPlay window� When launching
the start menu, you may have to click the Allow button
(Windows Vista) or Ye s (Windows 7) in the User account
control window, and enter the name and password of
the user with administrative privileges, if the current
user is not granted them�
3� If the menu window does not start automatically, se-
lect menu Start > Run (in Windows Vista and 7 sys-
tems: Start > All programs > Accessories > Run)� In
the Open eld of the Run window, enter X:\Autorun�
exe (where X is the optical drive letter) and press Enter�
4� Select the install option to run the installer�
5� Read the license agreement and accept it by selecting
the I accept the terms of the license agreement op-
tion. Click Next >�
6� If you want to install the drivers along with the soft-
ware (recommended), select the Install driver and
Ralink WLAN Utility option� If you want to install the
driver alone, click Install driver only� Click Next >�
7� (Windows 2000/XP only) If you want to use the soft-
ware supplied with the adapter (recommended), select
the Ralink Conguration Tool option and click Next>.
If you want to use the system wireless network wizard,
select the Microsoft Zero Conguration Tool option
and click Next >�
■ CD-ROM Drive
■ An 802�11n, 802�11g or 802�11b Access Point (for in-
frastructure Mode) or another 802�11n, 802�11g or
802�11b wireless adapter (for Ad-Hoc; Peer-to-Peer net-
working mode�)
Safety precautions
■ Do not use or store the device in dusty places, where
the humidity is high or in extreme temperatures�
■ Do not operate the device with wet hands to avoid the
risk of device damage or electric shock�
■ Do not clean the device with chemicals, such as ben-
zine or detergents – always clean the device with a soft,
dry cloth�
■ Disconnect the device from the computer prior to
cleaning�
■ Do not modify or x the device yourself in any way, it
might void the guarantee�
■ Do not drop or shake the device�
Driver and Utility installation
1� Power on your PC, let the operating system boot up
completely, and log in as needed� Connect the wireless
adapter to the USB connector� If the Found New Hard-
ware Wizard displays, click Cancel button�
2� Insert the supplied CD into the CD-ROM drive� The start