User`s guide

DMR160 User’s Guide V2.0 27
Recording
A recording can be started and stopped from the main toolbar of the Web Portal.
Recording Start / Stop
The BLUE LED will blink slowly when the DMR160 is recording / streaming and the Web Portal will Display
a “Recording” action message at the top of the page. The recording will use the inputs and audio levels
selected in the AV Controls section along with the currently selected layout template selected from the
Templates section.
To stop the recording and create the archived file, press the Stop button to begin the “indexing” action
process. The BLUE LED on the front of the unit will fast blink during the indexing procedure indicating that
the unit is busy and cannot record or stream until the process is complete. Depending on the length of
the archived material, this could be from several seconds up to several minutes to complete the indexing
process.
Note: Configuration settings of the DMR160 cannot be changed while recording.