User`s guide

DMR160 User’s Guide V2.0 17
As an Administrator
The Administrator maintains all rights to the DMR160.
1. If you are already logged into the DMR as a user or author, click on the LOGOUT selection at the
top of the main menu. You will be prompted to enter a username and password.
2. Use the login id “admin”. The default password is “MediaPOINTE”. Note that the login id and the
password are case sensitive.
As an Author
The Author maintains content creation rights on the DMR160. The Author can set recording Options but
does not have access to the Configure and Manage sections of the menu.
1. If you are already logged into the DMR as a user or admin, click on the LOGOUT selection at the
top of the main menu. You will be prompted to enter a username and password.
2. Use the login id “author”. The password will be user defined in the User Security section of the
main menu. Note that the login id and the password are case sensitive.
IP Settings
This section describes how to establish network settings on the DMR160.
To quickly find the system’s IP Address, connect a video display to the video output. The units
current IP Address will be displayed in the upper left corner of the confidence monitor.
1. Login as Administrator.
2. Click on the IP Settings under the “Configure” section of the menu.
3. Verify that the IP Address, subnet mask and Gateway are correct.
4. Once the setting changes are complete, click on the Apply Changes button.
5. The screen should refresh and display your new settings.
6. See the Network Configuration Table below for a more in-depth description of all fields.