User Manual

9. Cover the smart cap to mix the juice. You can put the fruits and vegetables, including
milk and other liquids into the mixed juice. After juicing, cover the smart cap to prevent the
residual juice from flowing out of the tube.
10. After juicing, keep the machine rotating for about 30 seconds, so that as much as the
fruit residue in the juice cup will be discharged.
"ON": Positive rotation "0": Stop "R": Reverse rotation
“ON” is the positive rotation gear. Push the food material into the machine to make juice.
“0” is the stop gear. When you want to turn off the machine, adjust the switch to this
position to stop the rotation.
“R” is reverse rotation gear.
When auger screw is blocked due to too many food materials crowding. Adjust the switch
to the “R” position, press and hold for 3-5 seconds, the blocked foods will be return upward.
After juicing, press and hold the “R” switch for 3-5 seconds, it will be easier to disassemble
the parts. If you release the “R” switch, it will stop working.
Tips
This can damage the motor from overheating.
After continuous use, before starting another running, let the juicer stand for 10 minutes
to cool down.
If other objects are inserted into the feeding tube during operation, such materials can
get stuck and damage the juicer parts and/or cause injury.
1. Operating the juicer without ingredients can cause damage to the auger screw.
2. Do not continuously operate the juicer for more than 10 minutes .
3. Do not put fingers or other objects into the feeding tube. Always use provided pusher
when needed.