Specifications

Circuit packs, channel service units, and power supplies
274 Hardware Description and Reference for Avaya Communication Manager
Hardware requirements
The TN2602AP IP Media Resource 320 feature requires the following hardware:
● TN2602AP circuit pack with one 10/100BaseT Ethernet port for services access
● Media Resource 320 adapter with one RS-232 serial port and two 10/100BaseT Ethernet
ports
● Slot in the media gateway that is CAT5 compliant. A new kit (PEC cod 63275) with twisted
pair wires is available for the MCC1 media gateway.
● A CAT5 or better cable (customer supplied)
Ethernet ports A single 10/100Mbps
Ethernet port out the
back. Uses an adapter.
Two 10/100Mbps
Ethernet ports. Only
one used. Uses an
adapter to access
both ports.
Codecs
● G.711 (64
channels
maximum,
unencrypted; 48
channels
maximum,
encrypted)
● G.729B and
G.723.1 (32
channels
maximum,
unencrypted; 24
channels
maximum,
encrypted)
● G.711 (320
channels
maximum,
unencrypted or
encrypted)
● G.729A,
G.729AB, (320
channels
maximum,
unencrypted or
encrypted)
● G.726A (320
channels
maximum)
1. For additional information on trace route, including limitation with the TN2602AP circuit pack, see the
Maintenance documentation.
Table 29: Comparison of TN2302AP Media Processor and TN2602AP IP Media
Resource 320 (continued)
Supported Features TN2302AP Media
Processor (V10 and
Higher)
TN2602AP IP Media
Resource 320
(standard and low
density)
3 of 3