Specifications

TN2214CP DCP digital line (2-wire, 24 ports)
Issue 6 February 2007 253
TN2214CP DCP digital line (2-wire, 24 ports)
The TN2214CP is designed for use in the US, Canada, and international countries for offer B
only.
The TN2214 has 24 DCP ports that can connect to 2-wire digital telephones. Such telephones
include 2400- and 6400-series telephones, the 302C and the 302D attendant console, and the
Callmaster IV, V, and VI.
The TN2214 supports either A- or Mu-Law companding.
The following table lists the TN2214CP-supported telephones and shows each of their wiring
sizes and ranges.
TN2215/TN2183 analog line for multiple countries
(16 ports) (international offers or Offer B only for US and
Canada)
The TN2215 and the TN2183 analog line circuit packs are designed for international offers or
for offer B in the US and Canada.
The TN2215 and the TN2183 provide 16 analog port interfaces. Each port supports one
telephone, such as 500 (rotary dial) and 2500 telephones (DTMF dial) from a tip/ring pair. Each
port also sends or receives signaling to and from a device, such as:
● analog telephone,
● answering machine,
● FAX, and
● loop-start CO port.
Telephone Wire size (AWG) Maximum range
(feet)
302C/D console 24 (0.2 mm
2
/0.5 mm) or 26 3,500 (1,067 m)
Callmaster-series 24 (0.2 mm
2
/0.5 mm) or 26 3,500 (1,067 m)
2400-series 24 (0.2 mm
2
/0.5 mm) or 26 3,500 (1,067 m)
6400-series 24 (0.2 mm
2
/0.5 mm) or 26 3,500 (1,067 m)