Specifications

SCC1 Media Gateway
Issue 6 February 2007 197
Slot 2 contains an EI or, for S8700-series Media Server only, an ATM Interface circuit pack
for a critical-reliability system. Slot 3 would also contain an EI circuit pack for direct-connect
critical-reliability system. Otherwise, all slots are available for optional circuit packs.
For an IP-PNC PN, slot 1 contains an IPSI circuit pack when the cabinet is in the B position
and the PN is connected to a duplicated control (high reliability) network. The other slots in
a port carrier can contain optional port circuit packs.
The following figure shows an example of a port cabinet.
Figure 52: Port cabinet (J58890H)
The following table describes the connectors to the port cabinet.
Connector Function
2 to 3
(B2 to B3)
An Expansion Interface port that provides an interface for a fiber-optic
cable. This cable runs either to an Expansion Interface circuit pack in
another PN or a Switch Node Interface circuit pack in a center-stage
switch. For an ATM configuration, these slots contain an ATM interface
circuit pack, and a fiber-optic cable connects out of the front of the circuit
pack to an ATM data switch.
1 to 18
(B1 to B18, C1
to C18, or D1 to
D18)
25-pair connectors that provide interfaces between the port circuit packs
and the cross-connect field or a fiber optic transceiver.
ccdf11h KLC 021105
T
N
2
3
1
2
A
P
T
N
5
7
0
T
N
5
7
0
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K