Specifications
130 Hardware Description and Reference for Avaya Communication Manager
Specifications
Site requirements
This table shows you the site requirements of the G350 Media Gateway.
Power cord specifications
Following are specifications for power cords suitable for use with the G350:
For North America: The cordset must be UL Listed/CSA Certified, 16 AWG, 3-conductor (3rd
wire ground), type SJT. One end is to be terminated to an IEC 60320, sheet C13 type connector
rated 10A, 250V. The other end terminates to either a NEMA 5-15P attachment plug for nominal
125V applications or a NEMA 6-15P attachment plug for nominal 250V applications.
For Outside North America: The cord must be VDE Certified or Harmonized (HAR), rated
250V, 3- conductor (3rd wire ground), 1.0 mm2 minimum conductor size. The cord terminates at
one end to a VDE Certified/CE Marked IEC 60320, sheet C13 type connector rated 10A, 250V.
The cord’s other end terminates to a 3-conductor grounding type attachment plug rated at a
minimum of 10A, 250V. The configuration is specific for the region/country in which the cord is
used. The attachment plug must bear the safety agency certifications mark(s) for the region/
country of installation.
The G350 Media Gateway relies on two ground connections. These connections are a mains
plug with an earth contact and a permanent Supplementary Ground Conductor. Because of
unreliable earthing concerns in Finland, Norway, and Sweden, the G350 Media Gateway must
be installed in a Restricted Access Location (RAL). Only trained service personnel or customers
can access the RAL. They know the reasons for the restricted access and any safety
precautions that must be taken. In these cases, these personnel or customers must use a lock
and key or other means of security when they access the G350 Media Gateway.
Description Value
Ambient working temperature 32-104°F (0-40°C)
Operation altitude up to 10,000 ft. (3048 m)
Front clearance 12 in. (30 cm.)
Rear clearance 18 in. (45 cm.)
Humidity 95% non-condensing relative humidity
Power rating 100-240 V~, 50-60 Hz, 7 A Max










